We have the solution for your problem
A musty smell, crumbling plaster or black mould stains are typical signs of dampness in the house. If the causes are not discovered and eliminated, this can lead to permanent damage to the building, loss of living quality and increased energy demand. Take a look at our different system solutions
Horizontal Barrier
In the case of ascending moisture, we apply our ISOTEC Horizontal Barrier. For this measure, we inject our specialized paraffin into the previously dehumidified wall, where it creates a barrier which permanently and reliably prevents further capillary ascending moisture.
Exterior Sealing
If moisture enters laterally, it is necessary to seal the area of the house that is in direct contact with the ground. For this purpose, we seal the affected area of the wall from the outside with our multilayered ISOTEC Exterior Sealing.
Interior Sealing
If walls are not accessible from the outside or you want to prevent excavations on the exterior, our ISOTEC Interior Sealing guarantees reliable sealing from the inside. This allows us to seal basements without any excavation work in order to use them as additional living space.
Crack Injection/Flexband
Water-bearing cracks in concrete components are sealed with our ISOTEC Crack Injection. We press our special resin into the cracks which seals them. In case cracks and joints are exposed to movement, we combine this measure with our ISOTEC Flexband System.
Renovation Plaster
Although the cause of moisture damage has been removed, the damp masonry needs quite some time to completely dry. Our ISOTEC Renovation Plaster facilitates this process, absorbs harmful salts and guarantees an immediate optic upgrading of the affected walls.
Mould Damage Removal
Mould infestation in the living space is not only unattractive but a threat to our health. Initially, we determine the volume of the mould infestation and examine - if necessary - the types of mould. Our staff eliminate the mould infestation according to the results.
Interior Insulation
In the case of listed or laboriously designed building façades, the only option to improve the heat insulation of exterior walls is to insulate from the inside. Our ISOTEC Interior Insulation provides energy savings and - thanks to its diffusion compatibility - a pleasant interior climate.
Climate Board
Humidity, through condensation caused by cooking, showering, insufficient heat insulation and so on, may provoke the growth of mould. Our ISOTEC Climate Board, is an intelligent construction material that absorbs excessive humidity from the air as well as preventing humidity through condensation. Thereby, withdrawing the cause of mould.
Drying System
Water damages caused by a burst pipe, for example, can immediately and securely be repaired by our ISOTEC Drying System. The affected living space will dry quickly, becoming habitable again before bacteria or mould can spread.
Basement floor renovation
The basement floors of old buildings are not usually of the same standard as today’s concrete slab. Therefore, use of such basements is fairly restricted. Our basement floor renovation effectively seals humid basement floors. Following renovation works, all kinds of objects, including those susceptible to moisture (ie: cardboard boxes) can be stored once again on the basement floor.
Balcony renovation
Defective balcony coatings and surfacing can pose a serious problem, because they let humidity penetrate the building through cracks and other flaws. Our ISOTEC balcony renovation offers secure waterproofing for balconies, terraces and adjoining building surfaces. We provide various visually attractive systems of optimal protective seals to waterproof your balcony.
Our solutions for you in the Santa Ponsa, Spain area
Our exterior waterproofing provides your building with secure protection against moisture penetrating from the side. Our exterior waterproofing is flexible and watertight under pressure.
Exterior sealing
Paraffin, a very flowable wax, permanently blocks the pores of the masonry. Capillary moisture no longer has a chance. The procedure may only be carried out by our authorised ISOTEC specialist companies.
Horizontal barrier
If the construction method does not allow waterproofing to be applied from the outside, or you do not want groundworks in your outdoor area, our ISOTEC interior waterproofing ensures reliable waterproofing from the inside.
Interior sealing
Our ISOTEC interior insulation ensures a pleasant indoor climate, prevents mold growth and maintains the temperature in the insulated rooms.
Interior insulation
Basement floor renovation closes off damp basement floors. After completion of the work, storage of moisture-sensitive inventory such as boxes on the basement floor is possible.
Basement floor renovation
Our ISOTEC climate panel, an intelligent building material, absorbs excess moisture from the air and thus prevents condensation dampness.
Climate panel
Water-bearing cracks in concrete components are sealed by our ISOTEC crack injection. This method is combined with the ISOTEC flex tape system for moving cracks and joints.
Crack injection/flexible tape
If the supply of water has been stopped, the drying phase of the masonry begins. Especially in older buildings, the drying of the remaining moisture is often associated with the efflorescence or crystallisation of the salts that are harmful to the building.
Restoration plaster
Mold infestation in the living area is not a trifle, but can endanger health. Our specialists eliminate the mold infestation.
Mould removal
Water damage caused by a burst pipe, for example, can be quickly and safely repaired with our ISOTEC drying systems.
Drying system
In the ISOTEC Group:
We stand for quality!
120000
Successful refurbishments
10000
Refurbishments per year
30
Years of success
Specialist for professional renovation
Our quality
As a specialist in the professional restoration of damp damage, we have carried out more than 120,000 successful restorations throughout the ISOTEC Group in over 30 years. All our ISOTEC systems and measures have been tested for years under real and practical conditions and their effectiveness has been confirmed by scientific studies. In cooperation with specialist institutions, quality standards for the implementation of the measures have been precisely defined step by step. In this way, we ensure that every renovation is a success.
Our References
- Sealing with liquid plastic
- Sealing of wall/floor junction
-
Einfamilienhaus, Capdepera (Costa de Canyamel)
- Damage: damage of balcony/terrace
- Interior sealing
-
Einfamilienhaus, Genova
- Damage: mould
- Horizontal barrier
- Interior sealing
-
Einfamilienhaus, Portals Nous
- Damage: humid walls
- Exterior Sealing
- Renovation plaster
-
Einfamilienhaus, Costa de la Calma
- Damage: humid walls
Your way with us
01 Your request to ISOTEC
Get in touch with us. No matter whether by phone or online via email or contact form. Together we will then arrange an on-site appointment for damage analysis.
02 We analyse the damage
Your ISOTEC expert examines the moisture damage on site and determines the causes of the damage in your property.
03 Discussion of the solution
Together you discuss the objectives and scope of the renovation. Based on the results of the analysis, we will prepare a renovation proposal tailored to your property and your wishes.
04 The redevelopment
We implement the renovation and the necessary work steps for you under the highest quality standards. Our professional and motivated employees will exceed your expectations and achieve a permanently satisfactory result.
